Errort 12 Brake
Error: 12.13 (0C0Dhex | 3085dec) Description: Faulty voltage | ||
|---|---|---|
| Response: Output stage inhibit | |
Cause | Measure | |
The voltage of the brake output is not compatible with the nominal voltage of the brake that was started up. | – Check brake startup. or – Use device with appropriate brake voltage. or – Use drive with appropriate brake. | |
Error: 12.20 (0C14hex | 3092dec) Description: Digital motor integration – critical error | ||
|---|---|---|
| Response: Output stage inhibit with self-reset | |
Cause | Measure | |
The intelligent brake rectifier of digital motor integration has detected a critical error. | Observe the error message of the subslave. Identify the exact cause of this error message and take the appropriate measures to eliminate the error. | |
Error: 12.21 (0C15hex | 3093dec) Description: Digital motor integration – error | ||
|---|---|---|
| Response: Emergency stop + output stage inhibit with self-reset | |
Cause | Measure | |
The intelligent brake rectifier of digital motor integration has detected an error. | Observe the error message of the subslave. Identify the exact cause of this error message and take the appropriate measures to eliminate the error. | |
Error: 12.22 (0C16hex | 3094dec) Description: Digital motor integration – warning | ||
|---|---|---|
| Response: Warning with self-reset | |
Cause | Measure | |
The intelligent brake rectifier of digital motor integration has signaled a warning. | Observe the warning of the subslave. Identify the exact cause of this warning and take the appropriate measures for elimination. | |
Error: 12.23 (0C17hex | 3095dec) Description: Digital motor integration – timeout | ||
|---|---|---|
| Response: Output stage inhibit | |
Cause | Measure | |
Communication with the intelligent brake rectifier is disrupted. | Check the connection. | |
Error: 12.24 (0C18hex | 3096dec) Description: Digital motor integration – initialization error | ||
|---|---|---|
| Response: Output stage inhibit | |
Cause | Measure | |
Initialization of the intelligent brake rectifier has failed. | – Acknowledge the error. – If the error occurs repeatedly, contact SEW‑EURODRIVE Service. | |
