Hardware

The following hardware is required:

  • MOVI-C® CONTROLLERS of the following performance class:
    • MOVI-C® CONTROLLERS of all performance classes can be employed to use MOVIKIT® StackerCrane effiDRIVE with MOVIKIT® StackerCrane MultiMotion.
    • At least one MOVI-C® CONTROLLER UHX45A is required to use MOVIKIT® StackerCrane effiDRIVE with MOVIKIT® StackerCrane MultiAxisController. Make sure that all drives of a MultiAxisController axis group have the same drive train. Otherwise, contact SEW‑EURODRIVE.
  • Also note the Cycle times to be set in each case.
  • Inverter as an interpolating device

For information on compatibility of the inverters used, refer to the MOVI-C® software modules document.