Error 18 Software error
Error: 18.4 (1204hex | 4612dec) Description: Task system – error | ||
|---|---|---|
| Response: FS – system error | |
Cause | Measure | |
A fault was detected while processing the internal task system. | – Switch the device off and on again. – If the error occurs repeatedly, contact SEW‑EURODRIVE Service. | |
Error: 18.7 (1207hex | 4615dec) Description: Fatal software error | ||
|---|---|---|
| Response: FS – critical fault | |
Cause | Measure | |
A fatal software error was detected. | – Switch the device off and on again. – If the error occurs repeatedly, contact SEW‑EURODRIVE Service. | |
Error: 18.9 (1209hex | 4617dec) Description: Internal software error | ||
|---|---|---|
| Response: FS – critical fault | |
Cause | Measure | |
The software has signaled an unexpected event. | – Switch the device off and on again. – If the error occurs repeatedly, contact SEW‑EURODRIVE Service. | |
Error: 18.109 (126Dhex | 4717dec) Description: Internal software error (message) | ||
|---|---|---|
| Response: FS – message | |
Cause | Measure | |
The software signals an unexpected event. | – Switch the device off and on again. – If the message occurs repeatedly, contact SEW‑EURODRIVE Service. | |
