Error 200 Oil level
Error: 200.0 (C800hex | 51200dec) Description: Oil level too low | ||
|---|---|---|
|
| |
Cause | Measure | |
Oil level dropped below minimum permitted value. | Perform visual inspection for oil leakage. | |
Oil level dropped below minimum permitted value. | Eliminate the oil leakage. | |
Oil level dropped below minimum permitted value. | Increase the oil level. | |
Error: 200.1 (C801hex | 51201dec) Description: Oil level low | ||
|---|---|---|
|
| |
Cause | Measure | |
Oil level close to minimum permitted value. | Check the oil level. | |
Oil level close to minimum permitted value. | Perform visual inspection for oil leakage. | |
Error: 200.2 (C802hex | 51202dec) Description: Oil level too high | ||
|---|---|---|
|
| |
Cause | Measure | |
Oil level above maximum permitted value. | Reduce the oil level. | |
Oil level increased due to oil contamination or foam formation. | Check the oil quality. | |
Oil level increased due to oil contamination or foam formation. | Perform an oil analysis. | |
Error: 200.3 (C803hex | 51203dec) Description: Oil level high | ||
|---|---|---|
|
| |
Cause | Measure | |
Oil level close to maximum permitted value. | Perform a visual inspection of the oil level. | |
Oil level increased due to oil contamination or foam formation. | Check the oil quality. | |
Oil level increased due to oil contamination or foam formation. | Perform an oil analysis. | |
