Manual mode (local mode)

For local operation, devices with a CBG22A or MOVIMOT® can be used flexibly with the option (..S.4). The MOVIKIT® must be parameterized according to the variant. The necessary setting options are located in the Module configuration/Basic settings > Front module design area.

Manual mode is activated via:

  • The key switch
  • MOVISUITE®

Application errors only take effect when you exit manual mode. For additional information about manual mode, refer to the CBG22A operating instructions.

Comparison of local operation using a CBG22A and using a front module (..S.4)

[1]

Example of local operation using a CBG22A

[2]

Example of local operation using the front module (..S.4)