Sizes X170 – 320
- Loosen the retaining screw [6].
- Remove the retaining screws [3] and remove the end plate [4].
- To protect the centering bore, screw the retaining screw [6] into the machine shaft [1]. The screw head must rest on the shaft end face.
- For disassembly of the gear unit, use the retaining screws [3] to attach the end plate [4] centrically to the hollow shaft [7]. The retaining screws [3] should be tightened hand-tight.
- Thread the ejector screw [8] into the end plate [4] to remove the gear unit from the machine shaft [1].
[6] | Retaining screw |
[3] | Retaining screw |
[4] | End plate |
[1] | Machine shaft |
[6] | Retaining screw |
[3] | Retaining screw |
[4] | End plate |
[7] | Hollow shaft |
INFORMATION
Disassembly is easier if you first apply assembly paste to the ejector screw [8] and the thread of the end plate [4].
[1] | Machine shaft |
[4] | End plate |
[8] | Ejector screw |
