Before you start
Check that the following conditions have been met:
- For gear units with extended storage option, observe the information in chapter Gear unit with long-term preservation.
- Remove any present transport protection.
- Secure the existing oil drain valves against unintended opening.
- As of size X..220 and for X2F..180 – 210, avoid no-load operation independent of the driven machine because operation with a load below the minimum load can damage the rolling bearings of the gear unit.
- For operation at low ambient temperatures, ensure that the limit temperature is adhered to, see chapter Limit temperature for gear unit startup. Ensure that the heating time is sufficient.
Additional information
