Configuring the software module

  1. In MOVISUITE®, double-click on MOVIKIT® RapidCreepPositioning Drive.
    • The configuration of the software module is displayed.

    [1]

    Button to return to the project overview

    [2]

    Parameter tree of the software module configuration (section MOVIKIT®)

    [3]

    Parameter display with setting fields

  2. Configure the software module using the respective setting fields.

    3. INFORMATION

    The module configuration can only be changed if the inverter is not released and the diagnostic mode is deactivated.
  3. Click button [1] after having completed the configuration.
    • The project overview is displayed.