Checking process data

Proceed as follows:

  1. Open the [Diagnostics] > [MOVIKIT® diagnostics] parameter group in the parameterization of the inverter in MOVISUITE®.
    • When starting MOVIKIT® diagnostics, monitor mode is active.
  2. To toggle between PC control and monitor mode, click the [Activate] or [Deactivate] button.
    • In monitor mode, you can monitor the process data of the fieldbus interface.
    • In control mode (PC control), values can be specified via the MOVIKIT® diagnostics user interface. The data are sent to the inverter automatically and continuously and take effect immediately.