Creating a project

INFORMATION

For detailed information on how to use the MOVISUITE® engineering software, refer to the corresponding documentation.
  • A new MOVISUITE® project has been created and is open.
  1. Add the required device nodes and software modules to the project.
    • See "Example project" and the documentation for the devices and software modules used.
  2. Configure the added devices and software modules.
    • Observe the specific explanations on configuration for MOVIKIT® Positioning Drive, Velocity Drive in this manual.
    • For detailed information on configuring the devices and software modules used in this project, refer to the corresponding documentation.
Additional information