Parameter channel via process data
Error code | Designation | Description | |
|---|---|---|---|
High word | Low word | ||
01 | 00 | Illegal Type | The data type in the data block header is unknown or is not supported. |
02 | See below: | Illegal Service | Service not supported. |
01 |
| The service code in the service header is unknown or is not supported. | |
02 | Filter in sequence header not supported. | ||
03 | 00 | Illegal Service | The requested service is not supported. |
04 | 00 | Illegal ID | The parameter with the specified index, subindex, or offset is not supported. |
05 | 00 | Sequence Error | Error while executing the sequence |
06 | See below: | Illegal Device State | The value in the data block is not within the permitted range of values |
01 |
| Hardware missing | |
02 | Parameter lock active | ||
03 | Configuration state required | ||
04 | Initialization in progress | ||
05 | Data Flexibility running | ||
06 | Auto setup active | ||
07 | PLC state | ||
08 | Hash value calculation running | ||
09 | Data download in progress | ||
0A | Startup state required | ||
0B | Standby mode active | ||
0C | The parameter access is blocked by an active function. | ||
0D | Invalid state of a component | ||
07 | See below: | Illegal Value | No authorization to perform the requested service |
01 | Value too great | ||
02 | Value too small | ||
03 | Invalid value | ||
04 | Maximum value length exceeded | ||
08 | See below: | No Permission | Resource not available on server |
01 | Only read access permitted | ||
02 | Access denied | ||
03 | Access not possible via the interface | ||
04 | Incompatible parameter set | ||
05 | Incompatible option | ||
06 | Inconsistent parameter set | ||
09 | 01 | Resource Error | Maximum buffer length exceeded |
02 | Data with the set granularity are not supported. | ||
03 | Maximum number of error messages exceeded. | ||
FF | FF | Internal Error | Internal software error |
