Removing EV../AV../XV..

  1. Remove the screws [22] to disassemble the forced cooling fan [170].
  2. Remove the cable grommet [269] with the encoder cable from the forced cooling fan [170].
  3. Loosen the retaining screws [232] and turn the conical spring washers [251] outwards.
  4. Loosen the screw at the coupling clamping hub [233] at the encoder end, the screw can be accessed through the slots of the encoder mounting adapter [A].
  5. Remove the encoder [220] from the encoder mounting adapter [A] or the intermediate flange [225].