Encoder .K8./.V8. - Integrated encoder connector - A1GA, A2GA - MOVIDRIVE®

INFORMATION

The connection covers of the EK8X and .K8./.V8. encoder designs are not compatible. Observe the following information to avoid damaging the encoder:
  • Do not use a .K8./.V8. connection cover with the EK8X encoder design.
  • Do not use an EK8X connection cover with the .K8./.V8. encoder designs.

D-sub → X..

X15: Connection of encoder/resolver to a MOVIDRIVE® modular/system/technology basic unit

X17: CES11A multi-encoder card

A..Y encoders can be connected only to the CES11A multi-encoder card.

[1]

DR.. motors with integrated connector for encoder signals without connection cover on the motor, with connection cover on the cable.

Connection type: A2GA

Encoder: E.8S, E.8R, E.8C, A.8W, A.8Y, A.8H, EK8W

The signals for thermal monitoring of the motor are not transmitted in the encoder cable.

[2]

DR.. motors with integrated connector for encoder signals with connection cover on the motor and open ends on the cable.

Connection type: A1GA

Encoder: E.8S, E.8R, E.8C, A.8W, A.8Y, A.8H, EK8W, EK8X

The signals for thermal monitoring of the motor are not transmitted in the encoder cable.

[3]

DR.. motors with integrated connector for encoder signals without connection cover on the motor, with connection cover on the cable.

Connection type: A2GA

Encoder: EK8X

The signals for thermal monitoring of the motor are not transmitted in the encoder cable.