Installing XH7A, XH8A

  1. Push the encoder [220] onto the shaft end.
  2. Screw in the screws [D] to mount the torque bracket.
    • Tightening torque 6 Nm
  3. Tighten the screw [E] of the clamping ring [F].
    • Tightening torque 5 Nm
  4. Mount the safety cover [657] or the forced cooling fan [170].
    • Screw [1711]: Tightening torque 11 Nm
    • Screw [22]: Tightening torque 28 Nm