EI8. Service kits
Currently, the EI8Z encoders cannot be retrofitted by the customer. Contact SEW-EURODRIVE if necessary.
The service kit includes all of the materials required to replace a defective encoder.
Three individual service kits A, B and C are required for the installation of a complete EI8R, EI8C, or EI8Z encoder system.
A | EI8. service kit Connection set | C | EI8. service kit Fan |
[1522] | Connection unit | [36] | Fan guard |
[1525] | M23 connector | [1160] | Cap screw |
B EI8. service kit Encoder | |||
[1517] | Encoder module | [1526] | Grommet |
[1518] | Screw | [1920] | Centering ring (aid) |
[1520] | Spacer |
|
|
The following information is required for the selection of the encoder service kit:
- Motor size
- Brakemotor or motor with backstop
- Encoder type EI8C(HTL), EI8R(TTL), or EI8Z
The following information is required for the selection of the fan service kit:
- Motor size
The following information is required for the selection of the connection set service kit:
- Type of connection (M23 connector or connection unit)
No service kits are currently planned for the encoder type EI8Z.
