Settings on the device
For a DC link connection with MOVIDRIVE® system or MOVIDRIVE® technology inverters, the inverters can be configured as a module bus master or module bus slave. This configuration is made using the switch setting "S3 Module bus operating mode":
- If the switch is in the upper end position, the device is configured as a module bus master.
- If the switch is in the lower end position, the device is configured as a module bus slave.
If the MDR60A.. regenerative power supply is used as a supply and regenerative module, set the operating mode for all MOVIDRIVE® system or MOVIDRIVE® technology inverters to module bus master.
No special setting is required for MOVITRAC® advanced.
INFORMATION
