MOVIKIT® DirectMode
The MOVIKIT® DirectMode is primarily designed for applications without energy storage units and provides the user with the following functions, among others:
- Operating the MDP92A and MDE90A devices from the MOVI-C® CONTROLLER
- Setting a state of charge in the DC link
- Reading measured values from the devices for use in the IEC program
INFORMATION
The automatic code generation automatically integrates all blocks required for operation.
Operating modes
The MOVIKIT® DirectMode, MOVIKIT® ParallelMode provides the following operating modes:
- State of charge control (StateOfChargeControl)
- Operating mode for regulating a specific state of charge in the DC link or energy storage unit by means of a connected device.
- Automatic mode (automatic)
- Operating mode for fully automatic operation of the device. The operating mode automatically establishes operational readiness and operates the DC link without external intervention.
For further information, refer to chapter Operating modes.
Additional functions
The MOVIKIT® DirectMode, MOVIKIT® ParallelMode provides the following additional functions by means of automatic code generation in the main function block:
- Power monitoring
- Additional function for monitoring and displaying all power flows in the Power and Energy Solutions system, such as axis power, input power or 24 V consumers.
For further information, refer to chapter Additional functions.
