Hardware
The following hardware is required:
INFORMATION
Make sure that all drives of a MultiAxisController axis group have the same drive train. Otherwise, contact SEW‑EURODRIVE.
INFORMATION
For information on compatibility of the inverters used, refer to the MOVI-C® software modules document.
- MOVI-C® CONTROLLERS of the following performance class:
- To use the MOVIKIT® StackerCrane effiDRIVE with MultiMotion, MOVI-C® CONTROLLERS of all performance classes can be used.
- To use the MOVIKIT® StackerCrane effiDRIVE with the MultiAxisController, at least one MOVI-C® CONTROLLER UHX45A is required.
- Also note the Cycle times to be set in each case.
