Fault 205 Input speed at HSS
Fault: 205.0 (CD00hex | 52480dec) Description: Input speed too low | ||
|---|---|---|
|
| |
Cause | Measure | |
Input speed below minimum permitted operating speed. | Increase the input speed. | |
Fault: 205.1 (CD01hex | 52481dec) Description: Input speed low | ||
|---|---|---|
|
| |
Cause | Measure | |
Input speed close to minimum permitted operating speed. | Check the application. | |
Input speed close to minimum permitted operating speed. | Increase the input speed. | |
Fault: 205.2 (CD02hex | 52482dec) Description: Input speed too high | ||
|---|---|---|
|
| |
Cause | Measure | |
Input speed above maximum permitted operating speed. | Reduce the input speed. | |
Fault: 205.3 (CD03hex | 52483dec) Description: Input speed high | ||
|---|---|---|
|
| |
Cause | Measure | |
Input speed close to maximum permitted operating speed. | Check the application. | |
Input speed close to maximum permitted operating speed. | Reduce the input speed. | |
Fault: 205.4 (CD04hex | 52484dec) Description: Incorrect direction of rotation | ||
|---|---|---|
|
| |
Cause | Measure | |
Drive turns in wrong direction of rotation. | Check the operating states. | |
Drive turns in wrong direction of rotation. | Set the correct direction of rotation. | |
