Fault 201 Oil sump temperature
Fault: 201.0 (C900hex | 51456dec) Description: Oil temperature too low | ||
|---|---|---|
|
| |
Cause | Measure | |
Oil temperature below minimum permitted operating temperature. | Switch off the gear unit. | |
Oil temperature below minimum permitted operating temperature. | Increase the temperature of the gear oil before starting. | |
Fault: 201.1 (C901hex | 51457dec) Description: Oil temperature low | ||
|---|---|---|
|
| |
Cause | Measure | |
Oil temperature close to minimum permitted operating temperature. | Increase the oil temperature before starting. | |
Fault: 201.2 (C902hex | 51458dec) Description: Oil temperature too high | ||
|---|---|---|
|
| |
Cause | Measure | |
Oil temperature above maximum permitted operating temperature. | Switch off the gear unit. | |
Oil temperature above maximum permitted operating temperature. | Reduce the oil temperature before starting. | |
Fault: 201.3 (C903hex | 51459dec) Description: Oil temperature high | ||
|---|---|---|
|
| |
Cause | Measure | |
Oil temperature close to maximum permitted operating temperature. | Check installation site/ambient conditions. | |
Oil temperature close to maximum permitted operating temperature. | Reduce the power. | |
