Fault 119 MOVIKIT® – MultiMotion additional functions
Fault: 119.0 (7700hex | 30464dec) Description: Interface not linked | ||
|---|---|---|
|
| |
Cause | Measure | |
Internal error | Contact SEW-EURODRIVE Service. | |
Fault: 119.1 (7701hex | 30465dec) Description: Invalid input parameter | ||
|---|---|---|
|
| |
Cause | Measure | |
One or several input parameters are invalid. | Check that the input parameters are within the limits. | |
Fault: 119.2 (7702hex | 30466dec) Description: Error reading configuration file | ||
|---|---|---|
|
| |
Cause | Measure | |
Configuration file for "AntiSlosh" add-on not found on memory card of controller. | In MOVISUITE®, download the data in the parameter setting of the controller under [Data management] by clicking "Update configuration data". | |
Fault: 119.3 (7703hex | 30467dec) Description: Invalid configuration parameter | ||
|---|---|---|
|
| |
Cause | Measure | |
A configuration parameter for calculating the AntiSlosh profile is invalid. | Select the configuration parameters of the AntiSlosh profile within the limits. | |
Fault: 119.4 (7704hex | 30468dec) Description: Invalid cam description | ||
|---|---|---|
|
| |
Cause | Measure | |
The cam description must be empty before calling the AntiSlosh constructor. | Delete the cam description before calling the AntiSlosh constructor. | |
Fault: 119.31 (771Fhex | 30495dec) Description: Undefined error | ||
|---|---|---|
|
| |
Cause | Measure | |
Internal error | Contact SEW-EURODRIVE Service. | |
