Version overview

Version

Change

9.0.6.200

MOVISUITE® version V2.30

First series version. For detailed information on the functions included, refer to the respective MOVISUITE® manual.

9.0.11.200

MOVISUITE® update package V2.30.1

Error eliminations:

  • The "Comparison of setpoint/actual speed values" signal provides a valid signal in the FCB 05 Speed control drive function even at negative speeds.
  • The subcomponent errors are displayed correctly in PI 3.
  • The errors of the additional function "Parameter channel via process data" have been corrected.
  • Errors in the parameter tree have been corrected.

10.0.2.200

MOVISUITE® data update V2.31.2

New functions:

  • Support of MOVIPRO® technology MPX..
  • Support of MOVIMOT® performance ELV compact extra-low voltage drives

10.1.8.200

MOVISUITE® version V2.50

New functions:

  • Startup of the software module using the "Startup wizard" tool
  • Changes in the parameter tree
  • The "Torque limit reached" signal is set to bit 2 of the status word for torque limit.
  • The "Comparison of setpoint/actual torque active" signal is set to bit 13 of status word PI 01.
  • The help texts of the parameters have been adjusted.

Error eliminations:

If no hardware limit switch is configured, error "E‑29.1/E‑29.2 hardware limit switch: Positive/negative limit switch hit" is no longer displayed when loading the software module.