Line contactor

• Only use line contactors of utilization category AC-3 (EN 60947-4-1).

Mains activations

• Ensure a minimum time of 120 s between two mains activations for AC 230 V / 1‑phase units.

• Maintain a minimum switch-off time of 10 s for 3-phase units.
• Do not turn the supply system on or off more than once per minute.

INFORMATION

Do not use the K11 input contactor for jog mode but only for switching the inverter on and off. Use the following commands for jog mode:

• Enable/stop
• CW/stop
• CCW/stop