Startup/operation
Make sure that any existing transport protection is removed.
Do not deactivate monitoring and protection devices of the machine or system, even for a test run.
Make sure the connection boxes are closed and screwed before connecting the supply voltage.
Depending on the degree of protection, products may have live, uninsulated, and sometimes moving or rotating parts as well as hot surfaces during operation.
Additional preventive measures may be required for applications with increased hazard potential. Be sure to check the effectiveness of the protection devices after every modification.
In the event of deviations from normal operation, switch off the product. Possible deviations are increased temperatures, noise, or vibration, for example. Determine the cause. Contact SEW‑EURODRIVE if necessary.
Do not separate the connection to the product during operation. This may result in dangerous electric arcs damaging the product.
The application is operated with protective extra-low voltage. Also in this case, note the following: If you disconnect the product from the voltage supply, do not touch any live components or power connections because capacitors might still be charged.
Observe the corresponding information signs on the product.
The fact that the operation LED and other display elements are no longer illuminated does not indicate that the product has been disconnected from the supply system and no longer carries any voltage.
Mechanical blocking or internal protective functions of the product can cause a motor standstill. Eliminating the cause of the problem or performing a reset may result in the drive restarting automatically. If, for safety reasons, this is not permitted for the drive-controlled machine, first disconnect the product from the supply system and then start troubleshooting.
Risk of burns: The surface temperature of the product can exceed 60 °C during operation. Do not touch the product during operation. Let the product cool down before touching it.
Cover unused connections with the supplied protection caps during operation.
