MOVI-PLC® and control cabinet devices with built-in MOVI-PLC®
According to current knowledge, the X37 Ethernet2 engineering interface is affected if the device was produced before July 2021 and delivered with firmware V19 or earlier.
Products with firmware V20 or later are not affected.
Engineering interfaces should be used only for temporary engineering and usually not be connected to the network. In applications where engineering interfaces are used e.g. for the visualization of process values, the PCs/controls must be protected from third-party access or, if possible, disconnected from the rest of the network. The fieldbus interfaces of the devices are not affected.
Please contact your sales contact or project contact at SEW‑EURODRIVE regarding the updatability and changeovers in your systems.
Additional information
