Configuring MOVIKIT® EnergyRecovery ParallelMode

If you use MOVIKIT® EnergyMode ParallelMode in the project to read and control multiple devices together with MOVIKIT® EnergyRecovery, also perform the following steps:

  • The configuration of MOVIKIT® EnergyRecovery has been completed for all devices.
  1. On the master device, set the DIP switch on the front of the device to master (top).
  2. On the device that follows the master, set the DIP switch on the front of the device to slave (bottom).
  3. Activate parallel operation for all devices in the configuration of MOVIKIT® EnergyRecovery in MOVISUITET® in the "Control technology" configuration menu in the "Settings" submenu.