Transportation
Inspect the shipment for damage as soon as you receive the delivery. Inform the shipping company immediately about any damage. If the product or the packaging is damaged, do not assemble, install, connect, or start up the product. If the packaging is damaged, the product itself may also be damaged.
The lifting eye is designed to carry only the mass of the motor without gear unit. Tighten the retaining screws of the lifting eye. Mounted gear units have separate suspension attachments, which must be used according to the gear unit operating instructions when lifting the gearmotor. Do not mount any additional loads.
The following figure depicts the position of the lifting eye of the motor without gear unit.
Remove the lifting eye before connecting the PE cable, see chapter "Electrical installation" > "Installation instructions".
Store the lifting eye for future service work, see chapter "Service" > "Device replacement".
Observe the following notes when transporting the device:
- Always use all attachment points if available. The attachment points are designed to carry only the mass of the product. Severe or fatal injuries. Do not apply any additional loads.
- Ensure that the product is not subject to mechanical impact.
If necessary, use suitable, sufficiently dimensioned handling equipment.
Do not transport or store the product on the fan guard.
