Information

WARNING

Removing the electronics cover will deactivate DynaStop®.
Severe or fatal injuries.
  • If deactivation is not permitted for the plant, you will need to initiate additional measures (e.g. mechanical disconnection).

WARNING

Electric shock caused by dangerous voltages in the connection box. Dangerous voltages can still be present for up to 5 minutes after disconnection from the power supply system.
Severe or fatal injuries.
  • Before removing the electronics cover, de-energize the device via a suitable external disconnection device.
  • Secure the device against unintended re-connection of the voltage supply.
  • Secure the output shaft against rotation.
  • Wait for at least the following time before removing the electronics cover: 5 minutes

WARNING

Danger due to improper installation/removal of drive units and mount-on components.
Injury.
  • Observe the notes on installation and removal.
  • Before releasing shaft connections, make sure that there are no active torsional moments present (tensions within the system).

INFORMATION

When activating the delivery state of devices with the option /P (customer-specific parameter set), parameter settings are implemented that deviate from the default delivery state set by SEW-EURODRIVE.