Notes

NOTICE

Selecting improper lubricants may damage the gear unit.
Damage to property.
  • Observe the following information.
  • The oil viscosity and type (synthetic) that are to be used are determined by SEW‑EURODRIVE specifically for each order. This information is noted in the order confirmation and on the gear unit's nameplate.
  • If you use other lubricants for the gear units and/or use the lubricants at temperatures outside the recommended temperature range, SEW‑EURODRIVE does not assume liability.
  • The lubricant recommendation in the lubricant table in no way represents a guarantee regarding the quality of the lubricant delivered by each respective supplier. Each lubricant manufacturer is responsible for the quality of their product.
  • Do not mix synthetic lubricants!
  • Do not mix synthetic and mineral lubricants!
  • Oils of the same viscosity class from different manufacturers do not have the same characteristics. In particular, the minimally and maximally permitted oil bath temperatures are manufacturer-specific. These temperatures are specified in the lubricant tables.
  • The values specified in the lubricant tables apply as of the time of printing of this document. The data of the lubricants are subject to dynamic change on the part of the lubricant manufacturers. For up-to-date information about the lubricants, visit:
  • www.sew‑eurodrive.de/lubricants