Startup errors

Error

Measure

The fieldbus monitor does not detect all modules.

  • Install the latest series firmware on all devices (frequency inverter and MOVI-C® CONTROLLER). Then generate the project again.
  • Check the process data start and length of all software modules of your MOVISUITE® project to ensure that the software modules are not configured in a way that they are overlapping.

The SEW_FbusHdl.FieldbusHandler variable cannot be found.

  • From the "Communication" configuration menu of the MOVI-C® CONTROLLER, select the fieldbus type and activate the IEC process data connection. Then generate the project again.

The MOVIKIT® fieldbus monitor is not displayed or axis group members do not start up.

  • Check whether you have the latest versions of all the software modules, MOVIRUN® and the firmware.
  • Check whether the MOVIKIT® fieldbus monitor was inserted. See chapter Importing the MOVIKIT® fieldbus monitor.
  • Check whether the IEC project is up-to-date.
  • Check whether the configuration is up-to-date.