Activating device replacement
Activate the functions for device recovery under [Data management] in the "Initialization" area.
Controller replacement function
The current failsafe data of the MOVI‑C® CONTROLLER is stored once on the OMH memory card. This means that the OMH memory card stores all the data that is required when replacing the MOVI‑C® CONTROLLER so that the system can run again in the same way as before the replacement.
Axis replacement function
The MOVI‑C® CONTROLLER offers the function of saving complete data sets of its lower-level devices to an SD or CFast memory card. Such data sets are, for example, axis data sets of MOVIDRIVE® devices and safe parameter sets of a safety option. You can use this function after an inverter replacement (including safety option), for example, to automatically transfer the saved data sets from the MOVI‑C® CONTROLLER to the new device.
The "Restore axis data sets via controller" function can be activated in MOVISUITE® in the parameter view of the controller under [Data management]. Selecting "Event for starting restore" in the same configuration menu offers the following options:
- Parameter set difference – Axis data sets are restored if a different CRC is detected, which means that the parameter set is not identical.
- Device replacement – Axis data sets are restored if a different UUID, and consequently a device replacement, is detected.
INFORMATION
The axis replacement function is only required for inverters without replaceable memory module.
The following devices are supplied with replaceable memory module as standard:
- MOVIMOT® flexible
- MOVIMOT® performance
- MOVIDRIVE® technology
- MOVITRAC® advanced with safety option
INFORMATION
