Connection to the communication network

The MOVI‑C® CONTROLLER has various communication interfaces:

  • Due to its universal fieldbus interfaces, MOVI-C® CONTROLLER can be connected to higher-level automation systems. The following fieldbus interfaces are integrated:
    • PROFIBUS
    • PROFINET IO
    • EtherNet/IP™
    • Modbus/TCP
  • The following drives and I/O module from SEW-EURODRIVE can be connected to MOVI‑C® CONTROLLER via the EtherCAT®/SBusPLUS system bus:
    • MOVIDRIVE® modular application inverter
    • MOVIDRIVE® system application inverter
    • MOVI‑PLC® I/O system C
  • For engineering of the MOVI‑C® CONTROLLER, a connection to an engineering PC must be established via an Ethernet communication interface. Engineering is carried out using the MOVISUITE® engineering software.