MOVI-C® – Topologies

Description

In this learning unit, you will learn which topologies are supported by the
MOVI-C® modular automation system and which components are used in the topologies.

 

Learning targets

Knowing and being able to differentiate between the topologies
Knowing which hardware and software modules can be used in which topology
Knowing the functions of the inverters and controllers within these topologies

 

Duration

15 minutes

 
100
MOVI-C® – Overview of the topologies
MOVI-C® – Overview of the topologies
Duration (minutes): 2
Progress:
0%
100

In this e-learning module, you will learn about the topologies in the MOVI-C® modular automation system and be able to differentiate between them.
100
MOVI-C® – Single-axis automation
MOVI-C® – Single-axis automation
Duration (minutes): 2
Progress:
0%
100

In this e-learning module, you will learn about the components with functions of the single-axis automation topology.
100
MOVI-C® – Motion control
MOVI-C® – Motion control
Duration (minutes): 2
Progress:
0%
100

In this e-learning module, you will learn about the components with functions of the motion control topology.
100
MOVI-C® – Module automation
MOVI-C® – Module automation
Duration (minutes): 2
Progress:
0%
100

In this e-learning module, you will learn about the components with functions of the module automation topology.
100
MOVI-C® – Motion slave
MOVI-C® – Motion slave
Duration (minutes): 2
Progress:
0%
100

In this e-learning module, you will learn about the components with functions of the motion slave topology.

Knowledge check
100
Knowledge check: MOVI-C® – Topologies
Knowledge check: MOVI-C® – Topologies
Duration (minutes): 5
Progress:
0%
100

You can test and confirm your knowledge on this topic with these tasks.

Additional material

MOVI-C® – Topologies poster
MOVI-C® – Topologies poster